Matters needing attention in the construction of light steel villas
1. Waterproof to ensure safety, paste waterproof paper on the bottom, etc.
2. Before the product is constructed, draw the boundary line of the set range, and carry out the construction according to the drawn line. The core material and the inner paper should not be stained with water.
3. In order to allow air-conditioning piping, etc., please take effective waterproof measures when opening holes on the product.
4. During construction, if the product is attached with mortar, etc., please remove it immediately.
5. When cleaning after construction, cut off the product at the neglected parts of the eaves and the upper windows, and do not use a hose to flush the water directly from the bottom where there is no active sealant.
6. In order to prevent water from entering the gap between the main body and the accessories, please be sure to fill the sealant in the designated position.
7. The sealant cannot bond with the core material, which may damage the product, so do not sit on the product or place heavy objects.
8. When the product comes out after packaging, please do not place the surface directly on the ground.
9. Please do not rub the product with hard objects such as gravel and metal scaffolding boards, which may scratch the product.
10. When there are scars on the surface of the product, please use pure repair paint for repair.
11. When the inside of the product is damaged due to similar objects, repair it with aluminum strips sold on the market as needed.
12. In order to prevent damage to the product spray paint, do not touch the powder, sparks, etc. when the product surface is cut.
13. Install the air-conditioning piping on the outer wall, and be sure to install it on the substrate, not on the steel plate on the surface of the product.
