Please pay attention during construction
1. Waterproof in order to be sure, paste waterproof paper on the bottom, etc.
2. Before product construction, draw the boundaries of the set range and carry out construction according to the drawn lines.
3. The core material and inner paper should not get wet with water.
4. For air-conditioning piping, etc., take effective waterproofing measures when opening holes in the product.
5. During construction, if mortar, etc. adheres to the product, remove it immediately.
6. When cleaning after construction, cut off the product in the neglected parts of the eaves and the upper windows. Do not use a hose to flush water directly from below where the sealant is not activated.
7. In order to prevent water from entering the gap between the main body and the accessories, be sure to fill the sealant in the designated position.
8. The sealant cannot bond to the core material.
9. The product may be damaged, so do not sit or place heavy objects on the product.
10. When the product comes out after packaging, please do not place the surface directly on the ground. Please do not rub the product with hard objects such as gravel and metal scaffolding boards, which may scratch the product.
11. When there are scars on the surface of the product, please use pure repair paint repair.
12. If the inside of the product is damaged due to the like, repair it with commercially available aluminum tape, etc. as needed.
13. In order to prevent damage to the product spray paint, do not touch the powder, sparks, etc. when the product surface is cut.
14. Install the air-conditioning piping on the outer wall, be sure to install it on the substrate, not on the steel surface of the product.
